Muc-Off Tubeless Rim Tape - 10m Roll with 4 Seal Patches

Muc-Off Tubeless Rim Tape

The ultimate pressure-sensitive adhesive rim tape engineered for tubeless bike tyre setups. Made from Muc-Off's own proprietary performance material, this tape provides just the right amount of stretch while maintaining the durability and strength needed for a lasting airtight seal. Semi-transparent for easy valve hole location. Comes as a 10m roll — enough for 4 applications — in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

Highlights

• Pressure-sensitive adhesive for the ultimate airtight seal
• Semi-transparent material — easily locate the valve hole
• Comes with 4x seal patches
• Infamous Muc-Off pink — even the inside of your rims stay looking fresh
• Available in 6 widths: suits Road, CX, Gravel, MTB and Plus-sized rims
• Extreme strength and durability
• Engineered to stretch and fit perfectly in the contour of your rim
• 10m roll — allows for 4 full applications

Why not also grab a pair of our Tubeless Valves to complete your tubeless setup?

How to Apply

1. Clean your rim using Muc-Off Glue & Sealant Remover to remove any residue from a previous setup.
2. Select the correct rim tape width to match your wheel's rim width.
3. Locate the valve hole.
4. Peel back the tape and begin applying on the opposite side to the valve hole.
5. Hold down with your thumb and lightly peel back as you press firmly for a strong bond.
6. Rotate the wheel and continue applying the tape all the way around.
7. Create an overlap of 10–15cm, then cut at a 45° angle and press the edge down.
8. Check for air bubbles and gaps — press down firmly if found.
9. Apply the finishing seal patch over the tape edge.
10. Push the valve through the rim hole and secure with the O-ring and locking ring.
11. Refit the tyre, inflate, and add your sealant. You're ready to ride tubeless!